Filter
Top Products
[ 26 ] THE INTEGRATED ANSWERING DEVICE
Setting the Time
The clock on the EXA3955 answering system starts when power is applied
to the base. Follow these steps to set the clock to the correct time.
1 Press twice.
The system announces the current time. The message
counter displays [ ].
2 Press to select the day of the week.
You hear the current day and the number ([ ]
through [ ]) is displayed on the base.
3 Press or until the correct day is announced
and the corresponding number is displayed.
4 Press to select the day.
5 Press or until you hear the correct hour
setting. The numbers [ ] through [ ] are displayed
on the base as each hour is announced.
6 Press to select the hour.
7 Press or until you hear the correct minute
setting. The numbers [ ] through [ ] are
displayed on the base as each minute is announced.
8 Press to select the minute.
flash/set
flash/set
flash/set
flash/set
mute/menu
• Normally the idle time
for the menu mode is
20 seconds before the
system returns to
standby. However for
setting the time, the
idle time is extended to
two minutes.
• Press and hold or
to quickly scroll
through numbers on the
display.
note
mute/menu
memo/rec delete
ans. on/off
redial/p memory flash/set
status
EXA3955 newstyle 3.3 7/4/1 6:48 PM Page 26