Uniden DCT758 Cordless Telephone User Manual


 
54
Press [select/ ] when the system is answering. If another handset is screening a call, you will hear a beep
and you will not be able to screen the call.
To answer the call, press
[ /ash].
To stop screening the call, press
[ ].
Recording a Conversation
You can record a conversation between two seconds and ten minutes long from the handset or the base. These
recorded conversations are treated just like regular messages. When the answering system is full, FL will appear on
the base LCD and recording will be terminated. You can not record three-way calls or intercom conversations.
From the base From the handset
Starting a
recording
During a conversation, press and hold
[memo/call rec].
The message counter LED ashes
“- -”. A conrmation tone that can be
heard by both parties sounds during
recording.
1.
2.
During a conversation, press
[menu/
clear].
Move the cursor to select CALL
RECORD, and then press
[select/ ].
RECORDING A CALL appears on the
display. A conrmation tone that can be
heard by both parties sounds during
recording.
1.
2.
3.
Stopping a
recording
Press
[memo/call rec] or [ ].
You will hear a conrmation tone,
and the message counter LED stops
ashing.
1.
2.
Press
[menu/clear].
Move the cursor to select CALL
RECORD, and then press
[select/ ].
STOP RECORDING appears on the
display, and you hear a conrmation
tone.
1.
2.
3.
Note: Every state has different regulations governing the recording of conversations over the
telephone. Make sure to check your local, state and federal laws before using this product to record
any telephone conversation in order to determine that your use is in compliance with such laws or
guidelines.