Filter
Top Products
47
Setting the Day & Time
If you do not set the clock on your answering system, your messages may not have the correct time and day stamp.
You can set the day and time from the handset or the base.
From the base From the handset
Press
[menu/clock].
Press
[ /select] or [ /select] until the
correct day is announced and the message
counter shows the corresponding number (1 for
Sunday, 2 for Monday, etc.).
Press
[set] to select the day.
Press
[ /select] or [ /select] until you
hear the correct hour setting. The numbers 1
through 12 appears on the base as each hour is
announced.
Press
[set] to select the hour.
Press
[ /select] or [ /select] until you
hear the correct minute setting. The numbers 00
through 59 appears on the base as each minute
is announced.
Press
[set] to select the minute.
Press
[ /select] or [ /select] until you hear
the correct AM or PM setting. The message
counter displays A or P.
Press [set] to select the AM/PM setting. A
conrmation tone sounds, and the day and time
are announced for your review.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Press
[menu/clear].
Move the cursor to GLOBAL SETUP and press
[select/ ].
Move the cursor to DAY & TIME and press
[select/ ].
Use
[ ] and [ ] to select the correct day, and
press
[select/ ].
Use
[ ] and [ ] to select the correct hour, and
press
[select/ ].
Use
[ ] and [ ] to select the correct number
of minutes, and press
[select/ ].
Use
[ ] and [ ] to select AM or PM, and
press
[select/ ]. You hear a conrmation tone.
1.
2.
3.
4.
5.
6.
7.