Filter
Top Products
15
Connecting the Base and Charging the Handset
Connect the AC adapter to the DC IN 9V jack.
CAUTION: To avoid risk of re and shock,
only use the Uniden AD-800 AC adapter.
Connect the AC adapter to a standard 120V AC
wall outlet. DO NOT use an AC outlet controlled by
a wall switch.
Place the handset in the base with the LCD screen
facing forward.
Make sure that the charge LED illuminates. If the
LED does not illuminate, check to see that the AC
adapter is plugged in and the handset makes good
contact with the charging contacts.
Charge your handset at least 15 to 20 hours
before plugging into the phone line.
Connecting to the Phone Line
Once the battery pack is fully charged, connect the
telephone cord to the TEL LINE jack and to a telephone
jack.
Testing the Connection
Try making a call. If your call does not connect or you
cannot get a dial tone, try the following steps:
1. Make sure the AC adapter cord is securely
connected to the DC IN 9V jack and a standard
power outlet.
1.
2.
3.
4.
5.