Filter
Top Products
37
Conferencing
If you have more than one handset, up to four people can participate
in a conference call. A three-way conference call consists of an
outside line and two stations. A four-way conference call consists of
an outside line, the base speaker phone, and two handsets. You can
easily join a call already in progress.
From the handset, press
[ /ash] or [ ] to join the call. From the
base, press
[speaker]. You can hang up normally; the other station
will still be connected to the call.
Transferring a Call
You can transfer a call from one station to another.
From the base From the handset
During a call, press
[int’com] ([hold/int’com/
xfer] on the dual-keypad base).
The call will automatically be placed on hold, and
a paging tone sounds on all stations. (On the
dual-keypad base, you can select the handset
you want to talk with by pressing
[1] through
[4], or press [*/tone] to page all registered
handsets.) To cancel the transfer, press
[speaker] or [int’com] ([hold/int’com/xfer]).
When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press
[speaker] again.
1.
2.
3.
During a call, press
[xfer/intercom].
Use
[ ] or [ ] to select the station you want
to transfer the call to, then press
[select/ ]. The
call will automatically be placed on hold, and a
paging tone sounds. To cancel the transfer, press
[ /ash] or [ ].
When another station accepts the transferred
call, you will be disconnected. If you want to
rejoin the call, press
[ /ash] again or [ ].
1.
2.
3.
Outside call
Handset #1
Handset #2
Base