Filter
Top Products
62
Symptom Suggestion
Severe noise interference.
• Keep the handset away from microwave ovens, computers, remote control
toys, wireless microphones, alarm systems, intercoms, room monitors,
fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
The Caller ID does not display.
• The call was placed through a switchboard.
• Call your telephone provider to verify your Caller ID service is current. There
may be a problem with your Caller ID service.
The handset doesn't ring or
receive a page.
• Make sure that you are not too far from the base.
• Charge the battery in the handset for 15 to 20 hours by placing the handset
on the base or charging cradle.
• Change the Digital Security Code (see Changing the Digital Security Code
on page
60).
You cannot register the
handset at the base.
• Charge the battery pack in the handset for 15 to 20 hours.
• Change the Digital Security Code (see Changing the Digital Security Code
on page
60).
The handset doesn't
communicate with other
handsets.
• Change the Digital Security Code (see Changing the Digital Security Code
on page
60).
• Make sure that you have registered all handsets (see Registering Accessory
Handsets on page
20).
An extra handset can't join the
conversation.
• Make sure there are not two handsets already using the conference feature.
• Make sure that another handset is not in privacy mode.
Room Monitor does not work.
• Make sure to place the handset(s) within the range of the base.