Filter
Top Products
32
Using Caller ID and Call Waiting
If you subscribe to Caller ID from your phone company, your phone will show you the caller's phone number and
name (if available) whenever a call comes in. If you subscribe to both Call Waiting and Caller ID, the phone also
shows you the name and the number of any call that comes in while you're on the line.
If your telephone provider supports seven-digit dialing, you can save your local area code
so it does not display in the Caller ID list. See
Seven-Digit Dialing on page 39 for more
information.
Using the Caller ID List
You can store up to 100 Caller ID numbers in each handset. Your phone shares memory between your Phonebook
and Caller ID entries. Once you reach your maximum phonebook entries of 100, Caller ID information will not be
stored (but it will still display when the call comes in).
To open the Caller ID list, press [ ] (on the right side of the four-way key). The phone will show the number of new
Caller ID records and the total number of stored records. Use [
] and [ ] to scroll through the list, or enter a
letter on the keypad to jump to the first Caller ID name that starts with that letter.
Making a Call from a Caller ID Record
1. When the phone is in standby, press [ ] to open the Caller ID list.
2. Use [
] and [ ] to find the Caller ID record you want to dial.
3. To add (or delete) a "1" to the beginning of the displayed phone number, press [*/tone/<].
4. Press [ / flash] or [
]
to dial the number.
Note: You can also press [ / flash] or [
]
before you open the Caller ID list.