Filter
Top Products
21
Registering DCX750 Handsets
To register DCX750 handsets, simply place the accessory handset in the
base. While the handset is registering, HANDSET REGISTERING
will appear
in the LCD. When REGISTRATION COMPLETE
is displayed, the handset
has been registered to the base. If REGISTRATION FAILED appears, remove
the handset from the base and try again.
Registering DCX640 or DCX700 Handsets
1. On the base, press and hold [flash] until the CHARGE LED starts to
blink.
2. On the handset, press and hold [#/→] until you hear a beep.
3. While the handset is registering, HANDSET REGISTERING
appears
in the display. When the display shows REGISTRATION COMPLETE
,
the handset has been registered to the base. If REGISTRATION
FAILED appears, please try these steps again.
Resetting Handsets
If you want to register the handset to a different base or replace a handset with another one, you must first clear the
registration information from the base and the handset.
1. Press and hold [
] and [#/>] for at least 5 seconds, until the SYSTEM
RESET menu appears.
2. Select the DEREGISTER HS submenu. WHICH HANDSET? appears in
the display.
3. Use [
] and [ ] to select the handset ID you want to de-register, and then press [select/ ].
DEREGISTER HS appears.
4. When the phone asks you to confirm, move the cursor to select YES, and then press [select/
]. You will
hear a confirmation tone.