Uniden DCT7585 Cordless Telephone User Manual


 
54
Press [select/ ] when the system is answering. If another handset is screening a call, you will hear a beep
and you will not be able to screen the call.
To answer the call, press [ / flash].
To stop screening the call, press [ ].
Recording a Conversation
You can record a conversation between two seconds and ten minutes long from the handset or the base. These
recorded conversations are treated just like regular messages. When the answering system is full, FL will appear on
the base LCD and recording will be terminated. You can not record three-way calls or intercom conversations.
From the base From the handset
Starting a
recording
1. During a conversation, press and hold
[memo/call rec].
2. The message counter LED flashes
"- -". A confirmation tone that can be
heard by both parties sounds during
recording.
1. During a conversation, press [menu/clear].
2. Move the cursor to select CALL RECORD, and
then press [select/
].
3. RECORDING A CALL appears on the display.
A confirmation tone that can be heard by both
parties sounds during recording.
Stopping a
recording
1. Press [memo/call rec], or [ ].
2. You will hear a confirmation tone, and
the message counter LED stops
flashing.
1. Press [menu/clear].
2. Move the cursor to select CALL RECORD, and
then press [select/
].
3. STOP RECORDING appears on the display,
and you hear a confirmation tone.
Note: Every state has different regulations governing the recording of conversations over
the telephone. Make sure to check your local, state and federal laws before using this
product to record any telephone conversation in order to determine that your use is in
compliance with such laws or guidelines.