Filter
Top Products
43
Using the Hailer Rename Option
1. Scroll, using PUSH/SELECT to reach HAILER RENAME. Push the knob once.
2. Rotate the PUSH/SELECT to select a listed name. Push to select it. Rotate the knob to
reverse highlight a desired new character. Push to select it. Select
YES to keep your
changes,
NO to discard them. Push to select. Rotate the knob to EXIT then push to exit.
Using the Scrambler Menu
Important: You must install an optional scrambler board in the radio to use the scrambler.
See “Using the Scrambler” on Page 23 for more information.
Setting a Scrambler Code
You can set the scrambler code to any of 32 different settings.
1. Rotate PUSH/SELECT to select
SCRAMBLE, then press PUSH/SELECT to select it.
A screen appears where you can select a scrambler code.
2. Rotate PUSH/SELECT until the scrambler code you want (
01-32) appears, then press
PUSH/SELECT to select it. A confirmation screen appears.
3. If the displayed scrambler code is correct, rotate PUSH/SELECT to choose
YES, then
press PUSH/SELECT to confirm it.
If the displayed scrambler code is not correct, rotate PUSH/SELECT to select
NO, then
press PUSH/SELECT to confirm it. Then repeat Steps 2 and 3 to enter the correct
scrambler code.
Using the WHAM Page Sub Menu
This option lets you page to help locate a missing WHAM handset.
1. Rotate PUSH/SELECT to select
WHAM PAGE, then press PUSH/SELECT to select it.
A screen showing the WHAM handsets used with the radio appears.
2. Rotate PUSH/SELECT until the WHAM handset you want to find is selected, then press
PUSH/SELECT to select it. The WHAM handset beeps for 1 minute or until any key is
pressed on the handset.
Using the Crosstrack (XTRACK) Screen
To use the Crosstrack Screen, you must have your radio correctly connected to a functioning
GPS device that supplies data to the radio. The screen lets you graphically see the deviation
of your vessel from a set course. The radio also displays the screen if your vessel is deviating
from that course. The screen is key in attending to a distress call. To manualy select the
screen, rotate PUSH/SELECT to select
XTRACK, then press PUSH/SELECT to select it.
Using the XTRACK Screen