Filter
Top Products
1.
2.
Select the channel that you and your group agreed to use for Selective Calling.
Press and hold the Tone Call Button for about 1.5 seconds. One long
beep will
be heard and the CAL indicator will appear on the LCD display while the
SELCALL ID is being transmitted automatically.
An Acknowledge Tone coming from the called radio will be received if you had
successfully made contact.
The Acknowledge Tone for the SUNDOWNER UH-099 is a succession of three
Low Tone Beeps.
5/6 Tone TX SELCALL Programming
1.1 Press the TC Button on the Microphone.
The TX SELCALL Code will be displayed. (Factory default: 00000)
" " " " "
L-fL-fL-fL-fU
LFlaShing
Use the <] or t> to select the digit position.The selected digit will flash.
Rotate the 0 to change the active digit value.
Channel Knob
When finished, transmit the TX Selcall Code or press IMEM Ito store the code
ENT
onto memory.
1.2 Selecting 5 or 6 Tone Format
1.21 From 5 to 6 Tone Format Setting
While the 5th digit is flashing, Press the t> .
A space bar [-] will appear and flash.
,; n ,; ,; ,-..\ II.-
~'LL~!b~!.!..=.. -
/1\
MEM
~
1-'
os l I
-
Page16