Filter
Top Products
[ 31 ]
ADDITIONAL
INFORMATION
Symptom
Severe noise interference.
The Caller ID does not display.
If you still have a problem.
Suggestion
• Keep the handset away from microwave ovens, computers, remote
control toys, wireless microphones, alarm systems, intercoms, room
monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switch board.
• Call your local telephone company to verify your Caller ID service
is current.
• Charge the handset.
• Call our customer hot line at 1-800-297-1023.
ADDITIONAL INFORMATION
General Information
The phone complies with FCC Parts 15 and 68.
Operating temperature: -10
° to 50°C (+14°F to +122°F)
AC Adapter Information
AC Adapter part number: AD-310
Input Voltage: 120V AC 60Hz
Output Voltage: 9V DC 210 mA
Battery Information
Battery part number: BT-905
Capacity: 600 mAH, 3.6V
Battery use time (per charge)
From fully charged -
Talk mode duration: 7 hours
Standby mode duration: 14 days
If the handset is left off of the base, the actual Talk mode duration
will be reduced respective to the amount of time the handset is off
the base.
Recharge your phone on a regular basis by returning the handset
to the base after each phone call. When the operating time
becomes short, even after the battery is recharged, please
replace the battery. With normal usage, the battery should last
about one year.
Replacement batteries may be purchased at your local Uniden
dealer or by contacting the Uniden Parts Department
(800) 554-3988. Hours are from 7:00 a.m. to 5:00 p.m. Central
Time, Monday through Friday. We can also be reached on the web
at
www.uniden.com
Specifications, features, and availability of optional accessories are
all subject to change without prior notice.
2960_eng combined.qxd 1/22/01 11:50 AM Page 31