Filter
Top Products
GETTING STARTED [ 13]
Entering Your Area Code
If you enter a 3-digit area code number in the Area Code option, your local area code does not appear
in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local seven digit number. For calls received
from outside your local area code, you will see a full 10-digit number.
1)When the phone is in the standby mode, press and hold
call id. The Caller ID setting screen appears.
2)Press
3
to select ¨Area Code¨ or press
▼
twice.
3)Press
select.
4)Use the number keys (
0 to 9) to enter the 3-digit area code.
5)Press
select. A tone sounds and the displayed area code is entered.
6)Press
call id to complete the setting. Or return the handset to the base unit to complete the setting.
The handset returns to the standby mode.
If your calling
area requires
10-digit dialing,
do not program
this option.
When the area code has already been stored in memory, the stored area code will be
displayed. To change it, use the
delete and number keys to enter the new area code.
Then press
select. A confirmation tone sounds.
To complete the setting, press
call id or return the handset to the base unit.
GETTING STARTED
2960_eng combined.qxd 1/22/01 11:50 AM Page 13