Filter
Top Products
ADDITIONAL INFORMATION
[ 27 ]
If the handset
battery pack is
completely
discharged or the
battery pack is
removed, the
digital security
code will be lost.
If this happens, a
new security code
is set
automatically
next time the
battery pack is
charged.
The digital security code is an identification code used to connect the handset and the base unit.
Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See "About the digital
security code", page 3.)
In the rare situation that you suspect another cordless telephone is using the same security code, you can
change the code.
1)Remove the handset from the base unit. Press and hold
page/find on the base.
2)The handset begins emitting a paging sound. While holding
page/find for at least 3 seconds, place
the handset on the base unit. The paging sound stops.
Leave the handset on the base for more than 5 seconds or until the
status LED stops flashing. A new
random security code is set.
Changing the Digital Security Code
ADDITIONAL
INFORMATION
2960_eng combined.qxd 1/22/01 11:50 AM Page 27