Filter
Top Products
Sheet 9
The letters above the number appear in order: press the 2 key once for A, twice for B, and three times for C.
You can also enter lower case letters and symbols (see the table below for all the available characters and
what keys to press to enter them).
For example, to enter Mom
Press [6] once to enter M.
Press [#/ ] to move the cursor to
the right.
Press [6] six times to enter o.
Press [#/ ] to move the cursor to
the right.
Press [6] four times to enter m.
New characters are inserted next to the
character highlighted by the blinking
cursor.
To enter between characters, move the cursor and enter a new character.
Use [ /tone/ ] and [#/ ] to move the cursor to the desired location.
To enter two characters controlled by the same key, enter the rst character, move the cursor to the right,
then enter the second character.
When the cursor is on the end of the digit, press [delete/transfer] to delete characters from last one as
needed.
If you made a mistake, move the cursor to the incorrect character and press [delete/transfer]. Then enter
the correct character.
To delete all the characters, press and hold [delete/transfer].
1)
2)
3)
4)
5)
•
•
•
•
•
•
•
keys 1 2 3 4 5 6 7 8 9
1
A B C a b c 2
D E F d e f 3
G H I g h i 4
J K L j k l 5
M N O m n o 6
P Q R S p q r s 7
T U V t u v 8
W X Y Z w x y z 9
* # - & ( )
(blank)
0
Number of times key is pressed
keys 1 2 3 4 5 6 7 8 9
1
A B C a b c 2
D E F d e f 3
G H I g h i 4
J K L j k l 5
M N O m n o 6
P Q R S p q r s 7
T U V t u v 8
W X Y Z w x y z 9
* # - & ( )
(blank)
0
Number of times key is pressed
Entering text in your phone
Use the number keypad to enter the phone number. Press [select/
channel] when you’re nished. The handset sounds a conrmation
tone and displays MEMORY STORED.
The number can be up to twenty digits.
If this phone number is a long distance call, be sure to include the
“1” in front of the phone number.
If you need the phone to wait before dialing the next digit (for example, to enter an extension number
or access code), press [redial/pause] to insert a two-second pause between digits. The display shows
a P where the phone will pause. You can add as many pauses as you want anywhere in the phone
number, but each pause does count as a digit.
After a few seconds, the handset goes back to the phonebook list. Use [ / ] and [ ] to select
another phonebook entry.
OR
Press [ /memory] to exit the phonebook. The phone returns to standby.
4)
•
•
•
5)
Store Number
8007303456｡
Store Number
8007303456｡
6-2. Finding Phonebook Entries
If you know the number of the phonebook entry you're looking for:
Press and hold the number key (0 through 9) assigned to that phonebook entry.
The handset displays the name and phone number saved for that phonebook entry. If the entry has no
number, the handset displays : <EMPTY> PRESS SELECT TO EDIT.
If the number you picked wasn't the right phonebook entry, just use [ / ] and [ ] to scroll through
the phonebook entries. Stop scrolling when you see the phonebook entry you want.
If you don't know the number of the phonebook entry you're looking for:
Press [ /memory] to open the phonebook list.
Use [ / ] and [ ] to scroll through the phonebook entries. Stop scrolling when you see the phonebook
entry you want.
6-3. Making a Call from the Phonebook
With the phone in standby, nd the phonebook entry you want to call (See section 6-2 on Finding Phonebook
Entries). Then press [TALK/ash] or [ ] to dial the number.
You can also press [TALK/ash] or [ ] and then nd the phonebook entry you want to call, and press
[select/channel].
6-4. Editing a Number in the Phonebook
With the handset in standby, nd the phonebook entry you want to edit (See section 6-2 on Finding
Phonebook Entries).
Press [select/channel] to open the MENU screen.
On the MENU screen, use [ ] to move the pointer to EDIT MEMORYXX, and press [select/channel].
The handset takes you to the STORE NAME screen from Step 2 of section 6-1 on Entering a New Number
into the Phonebook: just follow the same steps from there.
6-5. Deleting a Number from the Phonebook
With the handset in standby, nd the phonebook entry you want to delete (See section 6-2 on Finding
Phonebook Entries).
Press [select/channel] to open the MENU screen.
On the MENU screen, use [ ] to move the pointer to DELETE MEMORYXX, and press [select/channel].
The handset asks you to conrm.
To delete the entry, use [ / ] to move the pointer to YES and press [select/channel]. The handset
sounds a conrmation tone and goes back to the phonebook list.
OR
If you changed your mind, leave the pointer at NO and press [select/channel]. The handset returns to standby.
6-6. Storing Caller ID Records in the Phonebook
With the phone in standby, press [cid/menu].
Use [ / ] or [ ] to nd the Caller ID record you want to save.
Note:
Remember, the phone stores the digits exactly as they appear on the display. If you need to add or delete a
"1" from the displayed phone number, press [1]. (You can always go back and edit the phone number later.)
Press [ /memory] to open the phonebook.
Find the phonebook entry number you want to use (See section 6-2 on Finding Phonebook Entries).
Press [select/channel] to store the Caller ID information to the phonebook and return to the Caller ID list.
Note: If this number already has a phonebook entry saved to it, the handset asks if you want to replace the
existing entry. Select YES to replace the existing entry with the new one, or select NO to cancel and keep
the existing entry. The display returns to the Caller ID list.
•
•
•
•
1)
2)
3)
4)
1)
2)
3)
4)
1)
2)
3)
4)
5)