Filter
Top Products
Sheet 11
Deleting your personal greeting
Press [greeting]. While the currently-selected greeting is playing, press [ ]. The base deletes the personal
greeting and announces “Greeting has been deleted.”
Note: You cannot delete the prerecorded greetings. Pressing [ ] always deletes the personal greeting.
7-3. Turning the Answering System On and O
From the base From the handset
Turning On
With the phone in standby, press [ ].
The message counter shows the number
of received messages.
With the phone in standby, press [ / ]
to access the answering system. Press [6].
Turning O
With the phone in standby, press [ ].
The message counter display turns o.
With the phone in standby, press [ / ]
to access the answering system. Press [9].
Note: If the answering system announces “No remaining time” when you turn it on, the memory is full (the
message counter also shows . The answering system can't record any new messages until you delete
some of the saved ones.
7-4. Listening to Your Messages
The message counter shows the number of messages stored in memory.
If you have any messages that you haven't listened to yet, the message counter shows the number of these
new messages only.
The answering system plays your new messages rst; after you listen to all the new messages, you can play
any old messages.
You cannot delete new messages. If you try to delete messages before listening to them, the answering
system will beep and say “Please playback all messages.”
You can listen to your messages from the base or from a handset:
From the base From the handset
Playing new
messages
Press [ ]. The system announces the
number of new and old messages, then
plays your new messages.
Press [ / ]. The system announces the
number of new and old messages. Then
press [ /2] to play your new messages.
Repeating a
message
Press [ ] once to restart the current
message.
Press [ ] repeatedly to review previous
messages.
Press and hold [ ] to rewind through
the current message.
Press [ /1] once to restart the current
message. Press [ /1] repeatedly to review
previous messages.
Skipping a
message
Press [ ] to go to the beginning of the
next message.
Press and hold [ ] to fast forward
through the current message.
Press [ /3] to go to the beginning of the
next message.
Deleting a
message
While a message is playing, press [ ].
The message is permanently deleted.
While a message is playing, press [ /4].
The message is permanently deleted.
Deleting all
messages
While the phone is in standby, press [ ].
When the system asks you to conrm,
press [ ] again. All messages are
permanently deleted.
Not available.
Playing old
messages
After you listen to your new messages,
press [ ] again to play your old
messages.
After you listen to your new messages, press
[ / ] followed by [ /2] to play your
old messages.
Ending the
message review
Press [ ]. The phone returns to
standby.
Press [ /5] to stop. Press [END] to return to
standby.
Turning o the message alert tone
When all new messages are played back, the message alert tone will automatically deactivate. The tone will not
deactivate until all new messages are played back. To quickly turn o the tone, press any key on the base.
7-5. Screening Calls
If you let the answering system answer an incoming call, you can listen on the base speaker while the caller
leaves a message.
To speak to the caller, simply answer the call: the answering system stops automatically when you pick up
the call.
To mute the speaker and stop screening this call, press [ ]. The caller can continue the message, but you
will not be able to hear it. This mutes the speaker for this call only; it will play as soon as the next call comes in.
To cancel muting and listen to the speaker for the rest of this call, press [vol/select/ ] or [vol/select/ ].
If you mute the ringer for a call, you cannot screen that call.
7-6. Recording a Call
Every state has dierent regulations governing the recording of conversations over the telephone. Check your
local, state and federal laws before using this feature to make sure any recordings comply with local laws or
guidelines.
You can record up to ten minutes of ongoing call.
Calls must last at least two seconds.
Recorded calls are handled just like regular answering system messages.
To start recording an ongoing call, press and hold [memo] on the base. The message counter ashes ,
and the base sounds a beep that can be heard by both parties.
To stop recording, press [ ] or [memo]. You hear a conrmation tone.
If the memory is full, the message counter shows , and the base stops recording.
If another call comes in while you are recording a conversation, you can still press [TALK/ash] to switch to
the new caller. The base puts the original call on hold and begins recording the new call.
7-7. Recording a Voice Memo
You can record a voice memo directly onto the base; this memo is handled like a regular answering system
message. The memo must be at least two seconds long and no longer than four minutes.
With the phone in standby, press and hold [memo] on the base; the message counter ashes .
Start recording your message.
To stop recording, press [memo] again. The base sounds a conrmation tone and returns to standby.
Note: If the memory is full, the message counter shows , and the base stops recording.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1)
2)
3)