Filter
Top Products
If the
talk/batt low
LED begins to flash, the phone is designed to reduce its
functions to save power. The table below describes what to do to return your phone
to normal operation.
During a Call In Standby Mode
Only the TALK button operates. None of the buttons will operate.
The Handset beeps and the
talk/batt
The Handset
talk/
batt low
LED flashes
low
LED flashes once every 3 seconds. once every 3 seconds.
Complete your call as quickly as possible. You will not be able to make a call.
Return the Handset to the Base Unit for Return the Handset to the Base Unit for
charging. charging.
30
SETTING UP YOUR PHONE
SETTING UP YOUR PHONE
LOW BATTERY INDICATOR
When the Battery Pack in the Handset is
very low and needs to be charged, the
talk/batt low
LED on the Handset flashes.
BATTERY MEMORY EFFECT
Rechargeable batteries can develop a “memory” (reduced charge capacity)
caused by repeated charge and discharge cycles. The battery life will seem to be
shorter everytime you use the unit. To avoid Memory Effect, at least once a
month operate the unit until the
talk/batt low
LED begins to flash. Avoid
“topping off” the charge after using the phone for a short period of time. Also,
do not charge the Rechargeable Battery for extended period of time.
NOTE: Allow 15-20 hours without any interruption for the Handset to fully recharge.
8200-OM.qxd 22/10/98 15:44 Page 30