Filter
Top Products
34
Conferencing
If you have more than one handset, up to three people can participate in a conference call. A three-way conference
call consists of an outside line and two handsets. You can easily join a call already in progress. The handsets must
be currently connected to the same base (see page 21).
Press1) [
/Flash] or [ ] to join the call.
To hang up, return the handset to the cradle or press 2) [
]. The other party will still be connected to the call.
Transferring a Call
You can transfer a call from one handset to another. The handsets must be currently connected to the same base
(see page 21).
During a call, press1) [Clear/Int’com].
Use 2) [
] or [ ] to select the handset you want to transfer the call to, and then press [Menu/Select]. Select
ALL to page all other handsets. The call will automatically be placed on hold, and a paging tone sounds. To
cancel the transfer, press [
/Flash] or [ ].
When another 3) handset accepts the transferred call, you will be disconnected. If you want to rejoin the call, press
[
/Flash] again or [ ].
Answering a Transferred Call
When a handset receives a call transfer, it sounds a paging tone; handsets also show the ID of the handset that is
paging. To accept the call transfer:
To answer the page and speak to the transferring 1) handset, press [
/Flash] or [Clear/Int’com].
To accept the call and speak to the caller, press2) [
/Flash].
When you accept the transferred call, the transferring 3) handset will be disconnected.
Only the fi rst handset to answer the transfer page will be connected to the call. If the transfer page is not picked up
within one minute, the operation will be canceled.
DECT6035, 6035+1 OM.indb 34DECT6035, 6035+1 OM.indb 34 8/8/07 3:25:44 PM8/8/07 3:25:44 PM