Filter
Top Products
15
Connecting to the Phone Line
Once the battery pack is fully charged, route the telephone 1)
cord through the “LOOP” of base’s back as shown, and
connect the telephone cord to the TEL LINE jack.
Connect the telephone cord to a telephone wall jack.2)
Testing the Connection
Try making a call. If your call does not connect or you cannot
get a dial tone, try the following steps:
Make sure the AC adapter cord is securely connected to 1)
the DC IN 9V jack and a standard power outlet.
Check to make sure the battery is fully charged. (If you 2)
don’t see the “battery full” icon, check to make sure the
battery is properly connected).
To TEL LINE
Route the cord.
(Supplied)
DECT6035, 6035+1 OM.indb 15DECT6035, 6035+1 OM.indb 15 8/8/07 3:25:40 PM8/8/07 3:25:40 PM