Filter
Top Products
19
Expanding Your Phone
Adding Accessory Handsets
Your phone supports a total of six cordless handsets. You can now place a fully-featured cordless handset anywhere
AC power is available to connect the handset charger. All the handsets ring when a call is received.
Compatible Handsets
Your phone is compatible with the DECT 6005. If you purchased an accessory handset separately, you must register
the handset to the base before use. Accessory handsets will not operate until they are registered.
Charging Accessory Handsets
The handset’s battery recharges automatically when the handset is placed in the charger.
Use the supplied AC adapter (AAD-600S) to connect the DC IN 1)
9V jack to a standard 240V AC outlet.
Set the charger on a desk or tabletop, and place the handset in 2)
the charger with the LCD screen facing forward.
Make sure that the charge LED illuminates. If the LED does not 3)
illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the charging contacts.
Charge the handset battery pack for at least 15-20 hours 4)
before using your new handset for the fi rst time.
To AC outlet
To DC IN 9V
AC adapter (supplied)
Route the cord.
Caution: Use only the Uniden AAD-600S adapter.
DECT6035, 6035+1 OM.indb 19DECT6035, 6035+1 OM.indb 19 8/8/07 3:25:41 PM8/8/07 3:25:41 PM