Filter
Top Products
3
Place the mounting slots
over the pins
on the wall
plate, and
slide the base
down to lock it
into place.
Test the
Connection
Pick up the corded
handset from the
base. The phone should pick up line 1 automatically and change the
display to show
Talk
, and you should hear a dial tone. When you
get a dial tone, make a test call.
If... Try...
the display says
Check
or you don't hear a dial tone
checking the connection between the
base and the phone jack: make sure the
cord is connected to
TEL LINE 1/2
.
you keep hearing a dial tone setting line 1 to pulse dialing (see page 4).
there's a lot of noise or static
see page 43 for tips on avoiding
interference.
Test Line 2
Once you can make calls on line 1, make a
test call on the second line. Pick up the
corded handset and press the unmarked
key under
LINE2
. You should hear a dial
tone and the display should show
Talk
.
If... Try...
the display says
Check
or you don't hear a dial tone
checking the connection between the
base and the phone jack: if you have a
separate jack for each line, make sure the
cord is connected to
TEL LINE 2
.
you keep hearing a dial tone setting line 2 to pulse dialing (see page 4).
4.
WALL
DESK
WALL
WALL
DESK
(To telephone jack
for second line.)
WALL
DESK
WALL
WALL
DESK
(To telephone jack
for second line.)
0
0
LINE1
MENU
LINE2
SUN 12:00A
12/31/08
0
0
LINE1
MENU
LINE2
SUN 12:00A
12/31/08