Filter
Top Products
44
static on telephones. A DSL filter or telephone line filter usually solves
this problem. The technician who installed your DSL service might
have left some filters for you; if not, call your DSL provider or look in
any electronics store.
Plug the DSL filter into the telephone
wall jack and plug your phone’s base
into the filter. Make a test call to make
sure the noise is gone.
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes No
Press and hold
END
and
#
until the
System Reset
menu appears (about 5
seconds).
Select
Deregister HS.
The display lists
all registered handsets.
Select the handset you want to reset.
When the handset asks you to confirm,
select
Yes
. (It may ask you twice, just
to be sure.) The handset clears its
information from the base and deletes
it own link to the base.
1.
2.
3.
4.
Press and hold
END
and
#
until the
System Reset
menu appears (about 5
seconds).
Select
Base Unavailable
.
When the handset asks
you to confirm, select
Yes
.
(It may ask you twice, just
to be sure.) The handset
deletes its own link without
contacting the base.
1.
2.
3.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
On the base, open the menu and select
Register Handset
. The
display should say
Handset Registering
.
On the handset you want to register, press and hold
#
until the
handset display says
Handset Registering (
about 2 seconds).
1.
2.
DSL filter
Telephone
cord
Telephone
wall jack
DSL filter
Telephone
cord
Telephone
wall jack