Filter
Top Products
1
Installing Your Phone
Charge the Battery
Unpack all handsets, battery packs, and
battery covers. If any battery cover is
already on the handset, press in on the
notch and slide the cover down and off.
Line up the red and black wires
on the battery pack with the
label inside the handset.
Push the connector in until it
clicks into place; tug gently
on the wires to make sure
the battery pack is securely
connected.
Place the cover over the battery
compartment and slide it up into place.
Connect the base AC adapter to the
AC IN
7.8V
jack on the rear of the base. Route
the cord through the molded wiring
channel as shown.
If you have accessory
handsets, connect a
charger AC adapter
to each charger's
AC
IN 8V
jack and set the
plug into the notch as
shown. (These
adapters might
already be
connected.)
Plug the other end of each adapter into
a standard 120V AC power outlet.
1)
2)
3)
4)
5)
6)
7)
Red
Black
Red
Black
AC IN 8VAC IN 8V