Filter
Top Products
12
On the handset, press
TALK/FLASH
or
SPEAKER
to dial the number;
on the base, press
SPEAKER
.
(You can also press
TALK/FLASH
or
SPEAKER
before you open the CID
list. Find the number you want to dial, then press
MENU/SELECT
.)
Caller ID menu options
Open the CID list with the phone in standby. Find the number you
want and press
MENU/SELECT
. Choose one of these CID menu options:
Delete Entry
Erase this Caller ID number.
Store Into Pb
Add this number to this station's phonebook. The phone
prompts you to enter a name & edit the number; handsets
also prompt you to choose a personal ring.
Delete All
Erase this station's CID list. (This does not affect the CID
lists saved on any other stations.)
Add Call Block
(Handset only) Add the number to the call block list (see
page 14).
Using Call Waiting
If you get a Call Waiting call, the phone sounds a tone and displays
any CID information received for the waiting call. Press
FLASH
(
TALK/
FLASH
on a handset) to switch between the current call and the waiting
call; remember, each time you switch, there is a short pause before
you're connected to the other caller.
Using Seven-Digit Dialing
If you can make a local call by dialing only seven digits instead of ten,
you can tell the phone to hide your local area code in the CID list.
Do not enter an area code if your phone company requires ten-
digit dialing. You might not be able to dial from the CID list.
From any handset, open the menu with the phone in standby.
Select
Global Setup
, then select
Area Code
.
Use the number keypad (
0 - 9
) to enter your three-digit area code.
Press
MENU/SELECT
when you’re finished.
The phone uses the programmed code as a filter. When calls
come in, the phone compares the area code to the programmed
one. If they match, the phone hides the area code in the CID list.
While reviewing the list, press
#
to toggle the area code off & on.
3)
1)
2)
3)
4)