Filter
Top Products
58
59
Troubleshooting
Installing a telephone line lter or DSL lter
Any broadband Internet service that uses your telephone
line might interfere with standard phones. The most common type
of these services, DSL, often causes static on your telephone.
Fortunately, an easy-to-install lter removes this static from the line.
Technicians who install DSL service usually leave several lters for
the customers; if you can’t nd them, call your DSL provider or look
in any electronics store.
Just plug the DSL lter into the telephone wall jack and then plug
your phone’s base into the lter. Make a test call to make sure the
noise is gone.
Resetting the Handset
You may need to reset your handset in the following instances:
You lose a handset and purchase a new one.
You get the message Registration Failed when you try to register the handset.
You are unable to register any handsets to the base.
When you register new handsets to the base, the handset IDs do not match. (For example, the handset registers
as “Handset #4” but you only have two handsets.)
When you are instructed to by one of Uniden’s call center representatives.
Select the base you want to de-register the handset from (see Selecting the base on page 15).
Press and hold END and # for more than ve seconds. Select Deregister HS.
Select the handset which you are operating, and then press MENU/SELECT.
The phone will ask you to conrm the deregistration. Select Yes. The selected handset will clear its registration
information only from the base it is currently connected to, and then delete the link to the base from its own
memory.
When the base information is deleted, the handset displays Handset not registered-place handset on base to
register. See your Owner’s Manual for help.
•
•
•
•
•
1)
2)
3)
4)
5)
Telephone
cord
Telephone
wall jack
DSL filter
Telephone
cord
Telephone
wall jack
DSL filter