Filter
Top Products
38
Finding a Lost Handset
Using Hold, Conference and Transfer
39
Finding a Lost Handset
To locate a misplaced handset, press FIND/HOLD/INT’COM on the base when the phone is in standby. Use
or to select the handset you want to page, and then press MENU/SELECT. Select All to page all registered
handsets. To cancel paging, press FIND/HOLD/INT’COM on the base again.
Note: Handsets that are not currently connected to this base will not be paged.
Using Hold, Conference and Transfer
Placing a Call on Hold
During a call, press CLEAR/INT’COM on the handset or FIND/HOLD/INT’COM on the base to place the caller
on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.
To return to the party on hold, press TALK/FLASH or on the handset or pick up the corded handset from the
base or press on the base. The phone will return to the holding party.
Notes: • You can only place a caller on hold for ve minutes. Once ve minutes has passed, that party’s line will be
disconnected and the phone will return to standby.
• While a call is on hold, Call Waiting and CID on Call Waiting do not work.
Conferencing
If you have more than one handset, up to four people can participate in a
conference call. A four-way conference call consists of an outside line, two
handsets, and the base. You can easily join a call already in progress. The
handsets must be currently connected to the same base (see page 15).
Press TALK/FLASH or on the handset or pick up the corded
handset from the base or press on the base to join the call.
To hang up, return the handset to the cradle or press END on the
handset or return the corded handset to the base or press on the
base. The other party will still be connected to the call.
1)
2)
1)
2)
Outside call
Handset #1
Handset #2
Base
speakerphone
or corded handset