Filter
Top Products
8
Installing the Phone
9
Connecting the AC adapter
To the base
To avoid risk of re and shock, only use the Uniden PS-0012 AC adapter with the base.
To the DCX150 charging cradle (for multi-handset packs only)
Use only the Uniden
PS-0007 AC adapter
with the DCX150
charging cradle.
Connect the AC adapter to the DC IN 6V jack
on the bottom of the base.
Connect the AC
adapter to a
standard 120V
AC wall outlet.
Route the cord through the
molded wiring channel.
Don’t put any power cord where it people might
trip over it or step on it. If a power cord becomes
chafed or worn out, it can create a fire or
electrical hazard.
Connect the AC adapter to the DC IN 6V jack
on the bottom of the base.
Connect the AC
adapter to a
standard 120V
AC wall outlet.
Route the cord through the
molded wiring channel.
Don’t put any power cord where it people might
trip over it or step on it. If a power cord becomes
chafed or worn out, it can create a fire or
electrical hazard.
Connect the AC adapter to the
DC IN 9V jack as shown.
(It may already be connected.)
Connect the AC adapter
to a standard 120V AC
wall outlet.
Connect the AC adapter to the
DC IN 9V jack as shown.
(It may already be connected.)
Connect the AC adapter
to a standard 120V AC
wall outlet.