Uniden DECT1560 Series Cordless Telephone User Manual


 
52
Troubleshooting
53
Select the base you want to de-register the handset from (see Selecting the base on page 15).
Press and hold END and # for more than ve seconds. Select Deregister HS.
Select the handset which you are operating, and then press MENU/SELECT.
The phone will ask you to conrm the deregistration. Select Yes. The selected handset will clear its registration
information only from the base it is currently connected to, and then delete the link to the base from its own
memory.
When the base information is deleted, the handset displays Handset not registered-place handset on base to
register. See your Owner's Manual for help.
Re-register the handset to the base (see Registering accessory handsets on page 13).
If the handset cannot contact the base, it will display Out Of Range. Make sure the handset is in range of the base
and the base is connected to power; you can also reset the handset without the base (see the next section).
Resetting the Handset Without the Base
If your original base is not available for some reason, you can still reset the handset and use it with another base.
Press and hold END and # for at least ve seconds.
Move the cursor to select Base Unavailable and then press MENU/SELECT.
Select the base which you want to de-register from, and then press MENU/SELECT. Base Unavailable appears.
Move the cursor to select Yes, and then press MENU/SELECT. You hear a conrmation tone, and the handset
deletes its own base information without contacting the base. If the handset was registered to only one base,
it displays Handset not registered-place handset on base to register. See your Owner's Manual for help. If the
handset is still registered to another base, it searches for the other base and then returns to standby.
Register the handset to the new base (see Registering accessory handsets on page 13).
1)
2)
3)
4)
5)
6)
1)
2)
3)
4)
5)