Filter
Top Products
40
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes No
1. Press and hold
END
and
#
until the
System Reset
menu appears (about 5
seconds).
2. Select
Deregister HS.
The display
lists all registered handsets.
3. Select the handset you want to reset.
4. When the handset asks you to confirm,
select
Yes
. (It may ask you twice, just
to be sure.) The handset clears its
information from the base and deletes
its own link to the base.
1. Press and hold
END
and
#
until the
System Reset
menu appears (about 5
seconds).
2. Select
Base Unavailable
.
3. When the handset asks you
to confirm, select
Yes
. (It
may ask you twice, just to be
sure.) The handset deletes its
own link without contacting
the base.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
Does the handset fit in the base cradle?
Yes No
Place the handset
in the base. The
display should
say
Handset
Registering
.
1. On the base, open the menu and select
Register
Handset
.
2. On the handset you want to register, press
and hold
#
until the display says
Handset
Registering (
about 2 seconds).