Uniden DCX400 Cordless Telephone User Manual


 
20
Using Your Phone
Working with Two Lines
When performing common tasks, you can let the station use the
primary line, or you can manually choose a particular line for each
task. Using the primary line makes common tasks much simpler, but
you will need to assign a primary line to each station (see below).
If you want to... From a handset
From a handset
speakerphone
From the base
speakerphone
make a call: Dial the number, then
-
with the primary line Press
TALK/FLASH
. Press
SPEAKER
.
-
by choosing a line Press
LINE1
or
LINE2
.*
answer a call
When a call comes in, the soft keys blink to tell you which line is ringing.
-
with the primary line Press
TALK/FLASH
. Press
SPEAKER
.
-
by choosing a line Press the soft key for the line you want to answer.*
hang up
Press
END
or return the handset to
the cradle.
Press
SPEAKER
.
switch between the
speaker and earpiece
Press
SPEAKER
. Not available
put a call on hold
Press
INTERCOM/HOLD
; the soft key blinks to remind
you the line is on hold. To return to the call, press the
soft key (
LINE1
or
LINE2
) for the holding line.
switch lines during a
call (automatic hold)
Press the soft key for the other line; the current call
is automatically put on hold (see above). To return to
the call, press the soft key for the holding line.
mute the microphone
during a call
Press
MUTE
.
Press
MUTE/EXIT
.
Press again to turn the microphone back on.
mute the ringer for
this call only
While the phone is ringing,
press
END
. press
MUTE/EXIT
.
* On the handset, press
SPEAKER
to switch to the speakerphone.
Assigning a primary line
You can assign a primary line to each station; the station connects
to its primary line whenever it goes off hook (that is, when you press
TALK/FLASH
or
SPEAKER
). Whenever you want, you can bypass the