Uniden DCX400 Cordless Telephone User Manual


 
24
Delete Entry
Erase this entry from the CID or redial list.
Delete All
Erase all entries from this station's CID or redial list.
(This doesn't affect the CID or redial lists on any other
stations.)
Using Seven-Digit Dialing
If you can make a local call by dialing only seven digits instead of ten,
you can tell the phone to hide your local area code in the CID list.
Do not enter an area code if your phone company requires ten-
digit dialing. You might not be able to dial from the CID list.
1. With the phone in standby, open the menu and select
Global
Setup
.
2. Select
Line 1
or
Line 2
, then select
Area Code
.
3. Use the number keypad (
0
-
9
) to enter a three-digit area code.
4. Press
OK
when you’re finished.
The phone uses the programmed code as a filter. When calls
come in, the phone compares the incoming area code to the one
programmed for that line. If they match, the phone hides the area
code in the CID list.
While reviewing the list, press
#
to toggle the area code off and on.
When you dial from the CID list or save the number to the
phonebook, the phone dials or stores the number exactly as it is
currently displayed.
Using Call Waiting
A Call Waiting call refers to a call received on a line while that line
is already in use.
Call Waiting and Caller ID on Call Waiting are services provided
by your telephone company. You must subscribe to these services
to use these features.
Call Waiting is independent for each line: Call Waiting calls do not
roll over to the second line.