Filter
Top Products
30
To leave a conference call, hang up normally; all other stations
remains connected to the call.
If you conference line 1 and line 2 together (see page 21), the base
and four cordless handsets can hold a seven-way call with both
outside callers at the same time.
You can also use the speakerphone for a conference call, just like
you can with a normal call.
Using Privacy Mode
You can prevent other stations from joining a call. Start your call as
usual, then press
MENU
and select
Call Privacy
. When you hang up,
privacy mode turns off automatically.
As long you have privacy mode on, no other stations can interrupt
your call (you'll see a
in the handset display and a in the base
display). To allow another station to join the call, just turn privacy
mode off by repeating the process above (press
MENU
and select
Call Privacy
).
Using Call Transfer
To...
From the base From a handset
transfer a
call
1. Press
INTERCOM/HOLD
to put the call on hold.
2. Select the station you want to transfer the call to, or select
All
to page all the stations at the same time.
When the other station accepts the call, you'll be disconnected,
but you can join the call again.
cancel a
transfer
Press
SPEAKER
to return to the
call.
Press
TALK/FLASH
to return
to the call.
accept a
transferred
call
1. To answer the page and speak to the transferring station,
press
INTERCOM/HOLD.
2. To accept the call, press the soft key (
LINE1
or
LINE2
) for
the holding line.