Filter
Top Products
29
Using Multi-station Features
The expandable base works together with the accessory handsets
to give you some useful multi-station features. (A station can be any
cordless handset or the base.) You must have at least one accessory
handset to use the features in this section.
Expanding Your Phone
Your base supports a total of ten accessory handsets and 2
MULTIRANGE
TM
chargers, including any that were supplied with
your phone. It is compatible with both the DCX400 handset with
charger and the DRX402 handset with MULTIRANGE
TM
charger.
Your base might be compatible with other Uniden accessory
handsets: please visit our website for a list of compatible handsets.
Accessory handsets must be registered to the base before you
can use them. Handsets that aren't registered display a
Handset
not registered
message. For instructions on registering handsets
to this base, see page 40 or refer to the manual that came with the
accessory handset.
Any accessory handsets that came packaged with the base are
already registered to that base for you.
If a handset was previously registered to a base, you have to reset
it so you can register it to a new base (see page 40 for DCX400 and
DRX402 handsets).
Using Multi-Station Conference Calling
When an outside call
comes in on either line, the
base and four cordless
handsets can join in a six-
way conference call with the
outside caller.
To join a call in progress,
just connect to the active
line (press
LINE1
or
LINE2
).
CONFERENCE
CALLER IDENTIFICATION