Uniden D17882T Cordless Telephone User Manual


  Open as PDF
of 28
 
English - 21
Screen)
orfromahandset.Onlyonehandsetcanscreencallsatatime.If
anotherhandsettriestoscreencalls,itbeepsandreturnstostandby.
To... From the base From a handset
hear the caller leaving
a message
Listen to the caller
over the speaker.
Press
MessAge/Mute
.
answer the call
Pick up the corded
handset.
Press
tAlK/flAsh
.
mute the call screen
without answering*
Press
PlAy/stoP
.
Press
enD
or return the
handset to the cradle.
* Ifyoumutethecallscreen,thesystemcontinuestakingthemessage:itjuststops
playingthroughthespeaker.
Using the System While You're Away from Home
Youcandialintoyouransweringsystemfromanytouch-tonephone.
Beforeyoucanusethisfeature,youmustprogramasecuritycode.
Programming a Security Code
Withthephoneinstandby,openthemenu;select
Answering Setup
,then
select
Security Code
.Usethenumberkeypadtoenteratwo-digitsecurity
code(
01
to
99
).Press
Menu/select
whenyou’refinished.
# Remember to make a note of your new security code!
Dialing In to Your System
1. Callyourphonenumber&waituntilthesystemanswers.(Ifthesystem
isturnedoff,itanswersafter10rings&soundsaseriesofbeeps.)
2. Duringthegreetingorbeeps,press
0
andimmediatelyenteryoursecuritycode.
Ifyouenteritincorrectly3times,thesystem
hangsupandreturnstostandby.
3. Thesystemannouncesthetime,thenumber
ofmessagesinmemory,andahelpprompt.It
beepstoletyouknowit'swaitingfora
command.
4. Whenyouhearbeeping,entera2-digit
commandfromthechart.Eachkeymustbe
pressedwithin2secondsofeachotheror
theentrywillbetimedout.
# If you don't press any keys for 15
seconds, the system hangs up and returns to standby.
01 Repeat message
02 Play message
03 Skip message
04 Delete message
05 Stop playback
06 Turn the system on
09 Turn the system off
10 Hear help prompts
 previous next