Filter
Top Products
72
Symptom Suggestion
The Caller ID does not
display.
The call was placed through a switchboard.
Call your telephone provider to verify your Caller ID service is current.
There may be a problem with your Caller ID service.
•
•
You cannot register the
handset at the base.
Charge the battery pack in the handset for 15-20 hours.
Change the Digital Security Code (see page 7
0).
Make sure you have not stored 10 handsets already.
•
•
•
The handset doesn’t commu
-
nicate with other handsets.
Change the Digital Security Code (see page 70).
Make sure that you have registered all handsets.
•
•
An extra handset can’t join the
conversation.
Make sure there are not 2 handsets already using the conference feature.
Make sure that another station is not in privacy mode.
•
•
The Room Monitor feature
does not work.
Make sure to place the handset(s) within the range of the base.
Make sure that the Room Monitor feature is turned on.
•
•
The answering machine does
not work.
Make sure the base is plugged in.
Make sure that the answering machine is turned on.
Make sure that the message record time is not set to Announce only (see
page 5
5).
•
•
•
Messages are incomplete. The incoming messages may be too long. Remind callers to leave a brief
message.·
The memory may be full. Delete some or all of the saved messages.
•
•
There is no sound on the
base or handset speaker
during call monitoring or mes
-
sage playback.
Adjust the speaker volume on the base or handset.
Make sure the call screen feature is set to on.
•
•