Filter
Top Products
24
Adding Accessory Handsets
Your phone supports up to ten (10) handsets, including any handsets supplied with your phone. Accessory handsets
do not need to be connected to a phone jack. You can now place a fully-featured cordless handset anywhere AC
power is available to connect the handset charger.
Compatible Handsets
Your phone is compatible with the following Uniden 5.8 GHz Digital Accessory Handsets: TCX805, TCX905,
TCX400, TCX440, TWX977 and ELX500. Please visit our website at
www.uniden.com for the most up-to-date list of
compatible handsets. If you purchase an accessory or extra handset, you must register the handset to the original or
main base before use. Accessory handsets will not operate until they are registered.
Charge the Accessory Handset
The handset is powered by a rechargeable battery pack. The battery recharges automatically when the handset is
placed in the charger.
Connect the AC adapter to the DC IN 9V jack and to a standard
120V AC wall outlet.
Set the charger on a desk or tabletop, and place the handset in
the charger with the keypad facing forward.
Make sure that the
charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in and
the handset makes good contact with the base charging con
-
tacts.
Charge the handset battery pack for at least 15-20 hours before
using your new cordless telephone for the rst time.
1)
2)
3)
4)