Filter
Top Products
42
Finding a Lost Handset
To locate a misplaced handset, press [ash/nd handset] key on the base when the phone is in standby. All regis-
tered handsets will beep for 60 seconds, and PAGING appears on the handset display. To cancel paging, press any
key on the found handset or press
[ash/nd handset] key on the base.
Note: If the battery pack is completely drained, the handset will not beep when paging.
Using Hold, Conference and Transfer
Placing a Call on Hold
During a call, press [int’com/hold] to place the caller on hold. If you leave a caller on hold for more than ten
seconds, the display screen will read, HOLD.
To return to the party on hold, press
[ /ash] or [ ] on a handset or [ ] on the base. The phone will return
to the holding party.
Note:
You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party’s line will be discon
-
nected and the phone will return to standby.
While a call is on hold, Caller ID and Call Waiting cannot be received.
Conferencing
If you have more than one handset, up to four people can participate in a conference call. A four-way conference call
consists of an outside line, two handsets, and the base speakerphone. You can easily join a call already in progress.
Press
[ /ash] or [ ] on the handset or [ ] on the base to join the call.
To hang up, return the handset to the cradle or press
[ ] on the handset or [ ] on the base. The other party
will still be connected to the call.
1)
2)
•
•
1)
2)