Filter
Top Products
51
Using the Answering Machine Interface
Using Handset and Base Menus
You can set up your answering machine's primary features from the base or handset. The menu options of the base
have voice prompt.
When the phone is in standby, press the
MENU soft key and then scroll down and select ANSW. SETUP. Press the
OK soft key. Use [ ] or [ ] to scroll through the answering machine setup menu options. Select the option by press-
ing the
OK soft key.
To exit the menu and return to standby, press
[ ] on the handset and [
/exit
] on the base.
Handset operation
You can use your handset to operate your answering machine from anywhere in your home. When the phone is in
standby, press the
soft key on the handset to access the answering machine. REMOTE ANSWERING MACHINE
OPERATION appears on the handset display, and the answering machine announces the time, and number of new
and old messages. Keep the following things in mind when you use your handset to access your answering ma
-
chine:
You can enter a command at any time during the announcements.
After the rst announcement, you have 30 seconds to enter your rst command before the answering ma-
chine returns to standby.
If you receive a call, the remote operation is cancelled.
During the remote operation HANDSET REMOTE MODE appears on the base.
•
•
•
•