Filter
Top Products
43
Transferring a Call
You can transfer a call from one station to another.
During a call, press
[int’com/hold].
Use
[ ] or [ ] to select the station you want to transfer the call to, then press the
OK soft key.
The call will automatically be placed on hold, and a paging tone sounds. To cancel the transfer, press
[ /ash]
or
[ ] on the initiating station.
When another station accepts the transferred call, your call will be disconnected. If you want to rejoin the call,
press
[ /ash] or [ ] on the handset or [ ] on the base again.
Answering a Transferred Call
When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging. To ac-
cept the call transfer:
Press
[ /ash], [int’com/hold], or the ANSWER soft key from the handset (or [int'com/hold], [ ], or
the
ANSWER soft key on the base).
To speak to the caller, press
[ /ash] on the receiving handset or [ ] on the base.
If you have multiple handsets, only the rst handset to answer the transfer page will be connected to the call. If the
transfer page is not picked up within one minute, the operation will be canceled.
1)
2)
3)
1)
2)
Hold/Transfer
All
Handset #2
BACK DELETE OK
Hold/Transfer
All
Handset #2
BACK DELETE OK