Filter
Top Products
ADDITIONAL INFORMATION[ 58 ] www.uniden.com
Troubleshooting
If your phone is not performing to your expectations, please try these simple steps first.
Symptom
The charge/in use or
charge LED won't
illuminate when the
handset is placed in
the main base or charging
cradle.
The audio sounds weak
and/or scratchy.
Can't make or receive calls.
Suggestion
• Make sure the AC adapters are plugged into each charging cradle and
wall outlet.
• Make sure both handsets are properly seated in each charging cradle.
• Make sure the charging contacts on the handsets, main base and
charging cradle are clean.
• Move the handset and/or main base to a different location away from
metal objects or appliances and try again.
• Press select/channel to help eliminate background noise.
• Make sure that the handset is not too far from the main base.
• Re-register both handsets (see page 14).
• Check both ends of the base telephone line cord.
• Make sure the AC adapter is plugged into the main base and wall outlet.
• Disconnect the AC adapter for a few minutes, then reconnect it.
• Make sure that you are not too far from the main base.
• Check the dialing mode.