Filter
Top Products
GETTING STARTED[ 16 ] www.uniden.com
The cordless phone
features include
AutoTalk
TM
and
AutoStandby
TM
.
AutoStandby allows you
to hang up by simply
returning the handset to
the main base or
chaging cradle.
Setting Menu Display Options
There are five setup options, AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code,
Dial Mode and Language.
CIDCW and Dial Mode options can only be set by using Handset 1. If you try to set
by using Handset 2, you will not see these options listed on the LCD screen.
(Handset 1 shows
HS1 in the display while the phone is charging.)
Setting AutoTalk and CIDCW
1) Press and hold call id/menu. The following screen appears.
2) Use vol/ / or vol/ / to move the pointer to the
selection that you would like to change.
Press select/channel to toggle between
On and Off.
3) Press end and return the handset to the main base unit to
complete the setting. The handset returns to standby mode.
AutoTalk allows you to answer the phone without pressing the talk/flash key.
If the phone rings when AutoTalk is on, simply remove the handset from either
charging cradle and the phone automatically answers the call. If the phone rings
when AutoTalk is off, you must press talk/flash to answer the call.
Entering your Area Code
If you enter a 3-digit area code number in the Area Code option, your local area
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.