Uniden DXAI 5188-2 Series Cordless Telephone User Manual


 
THE INTEGRATED
ANSWERING DEVICE
THE INTEGRATED ANSWERING DEVICE [ 53]www.uniden.com
The voice memo
function is completely
independent of the
greeting message.
The voice memo
messages are recorded
as incoming messages.
When the answering
system is full, [ ]
appears on the message
counter and recording
is terminated.
A recorded
conversation is treated
as a typical message
and will be added to
the stored messages.
When recording a
conversation, all
dialing features except
for flash operation (see
Using Call Waiting on
page 22) are disabled.
Stop recording if you
need to enable any
other handset keys.
Voice memo
The voice memo function allows you to record messages
(more than 2 seconds up to 4 minutes).
1) Press and hold memo rec in standby mode.
You hear an announcement Record memo message and
a tone. [ ] flashes on the message counter.
2) Start your recording.
3) When you have finished, press the key, memo rec
or SET to stop recording. You hear a confirmation tone
and the system returns to standby.
volume
SELECT
SET
ringer find hs
MENU/CLOCK
answer on/off greeting
mic
memo
rec
charge in use
Recording a conversation
You can record up to 10 minutes of conversation while you are using your phone.
Any conversation that lasts less than 2 seconds will not be recorded.
1) During a conversation from the handset, press and hold memo rec.
The unit begins recording with a confirmation tone and [ ] flashes on the
message counter.
A beep that can be heard by both parties sounds during recording.
2) To stop recording, press the key or memo rec. You hear a confirmation tone.
Transferring a call also stops recording.
If you receive a call waiting tone while recording a conversation, press talk/flash to accept the
waiting call. The recording feature continues recording the new call. The original call is put on hold.