Filter
Top Products
GETTING STARTED [ 15]www.uniden.com
When to Re-register Handsets
You’ll need to re-register the handsets if any of the following things occur. Follow
steps on page 14 to re-register the handset.
1) Each time the digital security code is changed, you will need to re-register the
second handset. Refer to page 56 for details regarding the Digital Security Code.
2) When the main base is without power for more than 30 minutes, both handsets
will need to be re-registered.
3) If the second handset’s battery becomes very low, the handset must be recharged
for 15-20 hours and re-registered to the main base unit.
Call Transfer Feature
Your cordless phone allows you to transfer outside calls from handset to handset,
only one handset at a time can talk with an outside caller. The second handset
cannot go off hook to listen to conversations or make an outgoing call while the
other handset is in use.
To transfer a call
1) During a call, press delete/transfer. The call will
automatically be placed on hold and the transfer tone sounds.
2) When the other handset receives the call, the transfer tone stops.
To cancel the transfer and return to the caller, press delete/transfer or talk/flash on
the handset.
To receive a transfer call (from the second handset)
Pick up the handset from the base (when AutoTalk is set to on),
or pick up the handset and press talk/flash to answer the
transferred call. Additionally, you can answer the transferred call
by pressing any number key, /tone/ or #/ (when AutoTalk is set to on).
• Make sure to return the
handsets to the charg-
ing cradles after each
phone call.
• If you transfer the call
and it is not picked up
after 5 minutes, the
call will be
disconnected.
GETTING STARTED