Filter
Top Products
BASICS MEMORY DIALING
MEMORY DIALING [ 23]www.uniden.com
In memory dialing
operation, you must
press a key within 30
seconds or the phone
will return to standby
mode. If you return the
handset to the main
base or charging cradle,
the phone will return to
standby mode also.
Storing Phone Numbers and Names in Speed Dial Memory
Memory Dialing allows you to dial a number using just a few key presses.
Your cordless telephone stores up to 10 names/numbers in each handset.
1) With the phone in standby mode, press memory.
Select
Memory
is displayed.
2) Enter (0 - 9) to select the speed dial number where you
would like to store this entry. You can also scroll through the
list with vol/ / and vol/ / .
3) Press memory or select/channel.
4) Press memory or select/channel. The
Store Name screen
appears and a cursor flashes indicating that the display is
ready for the name to be entered.
If the selected speed dial number is already assigned, the
Edit screen appears. You can select
Edit to edit this entry,
select
Delete to delete this entry, or select Go Back to
choose another speed dial number.
5) Enter a name according to the instructions below. If no name is required, go to
step 6.
• The name can be up to 13 characters.
• See the "Steps for Entering Names and Special Characters" (see page 25).
• Use #/ and /tone/ to move the cursor to the desired location.
• Use delete/transfer to delete characters as needed.
• Press and hold delete/transfer to delete all the characters.
Select Memory
01
02 JOHN DOE
Store Name
Edit Memory01
Delete Memory01
Go Back
01:(Empty)
Press Select
to edit