Filter
Top Products
THE INTEGRATED TELEPHONE ANSWERING DEVICE[ 46 ] www.uniden.com
Setting the Message Alert tone
Message Alert feature lets you know you have new messages by sounding a short
beeping tone. If you set the Message Alert to On and when a new message is
received, the alert tone will sound every 15 seconds.
1) Press the
menu/clock key five times in standby mode.
You hear “Message alert” and the current setting ([ ] Off
or [ ] On), and it is displayed on the base. Then you hear the guidance for
setting the Message Alert.
2) Press the
volume/select/ or volume/select/ key to make your selection.
3) Press the
set/ringer key to select the new setting. You hear a confirmation tone,
then the announcement “Message alert” followed by the current setting you have
selected is announced. After a few seconds, the system announces “To set
language, press menu again”. When the first new message is received, the alert
tone will begin to sound.
Turning the Message Alert tone Off by pressing any key:
1) To quickly turn Message Alert tone off,
press any key on the base unit and the
tone will
automatically deactivate. To reset, go back into the menu setup mode
(steps 1 - 3 above.)
Turning Message Alert tone Off when you’re away from your phone:
1) When all
new messages are played back using the remote playback feature (see
page 54), the Message Alert tone will automatically deactivate. The tone will not
deactivate until all messages are played back.