Filter
Top Products
THE INTEGRATED TELEPHONE ANSWERING DEVICE[ 42 ] www.uniden.com
Setting the Time
The clock on the cordless phone’s answering system starts when power is supplied to
the base. Follow these steps to set the clock to the correct time.
1) Press the
menu/clock key in standby mode.
The system announces “Time”, the current time and
the guidance for setting the time.
2) Press the
volume/select/ or volume/select/
key until the correct day is announced. The numbers
[ ] through [ ] are displayed on the base.
3) Press the
set/ringer key to select the day.
4) Press the
volume/select/ or volume/select/
key until you hear the correct hour setting.
The numbers [ ] through [ ] are displayed on the
base as each hour is announced.
5) Press the
set/ringer key to select the hour.
6) Press the
volume/select/ or volume/select/
key until you hear the correct minute setting.
The numbers [ ] through [ ] are displayed on
the base as each minute is announced.
volume /select
menu/clock
delete play/stop
set/ringer
find hs answer on/off
greeting
mic
memo rec
charge
in use
repeat skip
repeat skip
• Normally, the system
will return to standby
if it remains idle for
10 seconds after the
volume/select/ or
volume/select/
key
is pressed. For setting
the time, however, the
idle time is extended
to two minutes.
• Press and hold the
volume/select/ or
volume/select/
key
to quickly scroll
through the numbers
on the display.