Filter
Top Products
GETTING STARTED
GETTING STARTED [ 17]www.uniden.com
1) When the phone is in standby mode, press and hold the
caller id/menu key. The Caller ID setting screen appears.
2) Press the
vol/ / key twice to select Area Code.
3) Press the
select key.
4) Use the number keys (
0 - 9), or delete/channel key to enter
the 3-digit area code.
5) Press the
select key. A confirmation tone sounds and the displayed area code is
entered.
6) Press the
end key or return the handset to the base unit to complete the setting.
The handset returns to standby mode.
When the area code has already been stored in memory, the
stored area code will be displayed. To change it, use the
delete/channel key and the number keys to enter the new area
code. Then press the select key. A confirmation tone sounds.
To complete the setting, press the end key or return the
handset to the base unit.
Choosing the dialing mode
Most phone systems use tone dialing which sends DTMF tones through the phone
lines. However, some phone systems (such as those in rural areas) still use pulse
dialing. The default setting is tone dialing. Depending on your dialing system, set
the mode as follows:
Make sure your battery
pack is fully charged
before choosing the
dialing mode.