Filter
Top Products
GETTING STARTED[ 16 ] www.uniden.com
Setting Menu Display Options
There are five setup options available. They are Caller ID options (AutoTalk, CIDCW
[Caller ID on Call Waiting], Area Code), Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the
talk/flash key.
If the phone rings when AutoTalk is on, simply remove the handset from the base
and the phone automatically answers the call. If the phone rings when AutoTalk
is off, you must press the
talk/flash key to answer the call.
Caller ID options
To change your AutoTalk and CIDCW:
1) Press and hold the
caller id/menu key in standby mode. The
following screen appears.
2) Use the
vol/ / or vol/ / key to move the pointer to
the selection that you would like to change.
Press the
select key to toggle between On and Off for AutoTalk and CIDCW.
3) Press the
end key and return the handset to the base unit to complete the
setting. The handset returns to standby mode.
To enter your Area Code:
If you enter a 3-digit area code number in the
Area Code option, your local area
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.
• If your calling area
requires 10-digit
dialing, do not
program the Area
Code option.
• The cordless phone
features include
AutoTalk
TM
and
AutoStandby
TM
.
AutoTalk allows you
to answer a call by
just removing the
handset from the base
so you don't have to
waste time pushing
buttons. AutoStandby
allows you to hang up
by simply returning
the handset to the
base.