Filter
Top Products
GETTING STARTED[ 16 ] www.uniden.com
1) When the phone is in the standby mode, press and hold the
cid/menu key. The Caller ID setting screen appears.
2) Press the
vol/ring/ key twice to select ¨Area Code¨.
3) Press the
select key.
4) Use the number (
0 - 9) or delete/ch key to enter the
3-digit area code.
5) Press the
select key. A confirmation tone sounds and the displayed area code is
entered.
6) Press the
end key or return the handset to the base unit to complete the setting.
The handset returns to standby mode.
When the area code has already been stored in memory, the stored
area code will be displayed. To change it, use the delete/ch key
and number keys to enter the new area code.
Then press the select key. A confirmation tone sounds. To
complete the setting, press the end key or return the handset to
the base unit.
Entering Your Area Code
If you enter a 3-digit area code number in the Area Code option, your local area
code does not appear in Caller ID messages. Do not program this option if your
calling area requires 10-digit dialing. When reviewing Caller ID messages, you will
see only the local seven digit number. For calls received from outside your local area
code, you will see a full 10-digit number.