Filter
Top Products
77
Set Audio AGC
This allows you to turn AGC (Automatic Gain Control) on or off for Tone-Out operations. The
default setting is Off.
Analog - Press E/yes to toggle On or Off.
FIRE TONEOUT STANDBY/SEARCH
Press Menu. Scroll to Tone-Out for... and press E/yes.
Scroll to Tone-Out Standby and press E/yes.
(BCD536HP Only) press FUNC then SQ.
See also Set Search Key.
Scroll to monitor a Tone-Out channel (0-31).
Press Func then System to exit.
Any transmission received on the frequency will not be heard but you will still see the signal
strength bars.
To monitor a different frequency, scroll to a tone-out (channel) with a different frequency.
If you press Channel while in Standby/Search mode, the scanner temporarily exits and you will be
able to hear any transmissions on that frequency. No alerts sound, even if a tone-out matches one
you have programmed in hold mode. Press Channel again to return to Standby/Search mode.
If the scanner nds tones in Tone-Out Search mode, you will see Set Found Tone A and B? after
you press E/yes to save.
Select a Dierent Tone-Out
Turn the Scroll Control.
Listen to Tone-Out Frequency
Press Channel.
Tone-Out
channel name
Tone A and B
frequency
Tone-Out
Standby Status
Tone-Out
channel
Tone-Out Standby Mode
Tone-Out Search Mode